Everyone post your intercooler setup in here! - Page 3 - Team-2G Mitsubishi Forum

Draggo42684 · 12-25-2005, 11:04 AM

what's the item number, on this computer it wont let me access links.

gsxgate24 · 12-25-2005, 11:23 AM

Item number: 8023673325

Silk90 · 12-25-2005, 11:40 AM

is it just me or isnt 350cfm damn low for a fmic?

bird man · 02-04-2006, 03:53 PM

i have the greddy Rspec FMIC. im using it with an evo 3 16G and thay are great together!

swedeGSX · 03-29-2006, 10:06 AM

Universal FMIC with custom 2,5" SS piping.

I also made my own J-pipe.

Arrogance · 03-29-2006, 05:57 PM

Swede .. Where did you get your core from?

swedeGSX · 03-30-2006, 03:29 AM

It the 600 X 300 X 75mm from http://www.h2mracing.com Here is a direct link to IC http://www.h2mracing.com/produkter/m...tercooler.html

It's a mailorder place here in sweden, you can probably find one in the US for less $$. /Martin

Arrogance · 03-30-2006, 03:30 PM

Heh .. I can't read swedish .. How well does it flow .. How much hp is it supposed to support?

2roll4life7 · 03-30-2006, 07:23 PM

I have a Dejon Race FMIC (28"x14x"3") with powdercoated blue UICP and LICP. The bumper had to be custom cut.

swedeGSX · 03-31-2006, 03:00 AM

I don't have any flow numbers on it. They recommed it for 300-700hp. Pressure tested to hold 6 bar (87psi), it has 15 fins/inch. 0.1bar pressure drop at 1bar (1.45 @ 14.5psi)
I measured the temp att throttleplate before and after. I was happy with the results. Cruise speed temp drop from 80F to 70F. WOT in top of 4th gear was 194 with smic and 90 with fmic. Even though I was boosting 19psi with fmic and 15psi with smic. It was also 5F warmer on the day of testing the fmic. So it seems to work good.

gsx rated98 · 05-19-2006, 01:00 PM

Im currently running SBR race core W/ short route piping. Im very pleased with the setup. Ill be selling that set up soon to a friend, because i just got a prototype from Extreme. All aluminium core and piping.

lambogst · 05-24-2006, 08:28 AM

im running a spearco FMIC with greddy i/c piping

spyderdreams · 06-25-2006, 07:51 PM

24x12x4 fmic from extreme motorsports. They also did the aluminum piping wich is one peice from the intercooler to the mafs. Realy happy with the setup.

SCR · 08-02-2006, 03:17 PM

27x7x3 with 2.5 end tanks and all custom IC piping/routing

Korupt · 04-20-2007, 10:49 AM

SBR 2G Race FMIC Kit. I can't complain about it and it looks great on the car. I can definitally notice a difference since I have had it on.